Spring - Hanger

Spring - Hanger

Removal and Installation

1. Note: Both the left side and the right side spring hangers are removed and installed the same way. Only the left side is shown.

Raise and support the vehicle.

2. Remove the wheel and tire assembly.
3. Place a suitable jack under the front drive axle housing.





4. Remove the nut and bolt, and disconnect the shock absorber from the spring cap.





5. Remove the nut and bolt, and lower the jack until the spring is out of the spring hanger.





6. Remove seven bolts and the spring hanger.
7. To install, reverse the removal procedure.