LH

Removal

CAUTION: This vehicle is equipped with a composite material fuel supply manifold. If the supply manifold is used as a leverage device, damage may occur to the supply manifold. Care must be taken when working around the fuel supply manifold.

1. Remove the upper intake manifold.
2. Disconnect the fuel line.





3. Disconnect the camshaft position (CMP) sensor electrical connector.





4. Disconnect the differential pressure feedback EGR transducer.
1 Disconnect the electrical connector.
2 Disconnect the vacuum hoses.





5. Disconnect the engine electrical connector.





6. Disconnect the electrical connector from the valve cover.





7. Disconnect the radio ignition interference capacitor electrical connector.





8. Disconnect the ignition coil electrical connector.
9. Disconnect the spark plug wires from the ignition coil.





10. Remove the valve cover.
- Discard the gasket.
11. To install, reverse the removal procedure.