Electronic Brake Control Module: Service and Repair

Removal

1. CAUTION: Prior to removal of the module, it is necessary to upload module configuration information to the scan tool. This information needs to be downloaded into the new module once installed.

Disconnect the battery ground cable.





2. Remove the hydraulic control unit bolts.





3. Disconnect the anti-lock brake control module electrical connectors.





4. Remove the anti-lock brake control module.
1 Remove the bolts.
2 Remove the control module.

Installation








1. CAUTION: Once the new module is installed, it is necessary to download the module configuration information from the scan tool into the module.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.

To install, reverse the removal procedure.