Power Seat Switch: Service and Repair

Seat Regulator Control Switch

REMOVAL
1. Disconnect the battery ground cable.







2. Remove the front seat back recliner handle.
1 Remove the screw.
2 Remove the front seat back recliner handle.







3. Remove the front seat lumbar support knob.







4. Remove the front seat track side shield.
1 Remove the screws.
2 Remove the pin-type retainer.
3 Remove the front seat track side shield.







5. Disconnect the seat regulator control switch from the front seat track side shield.
1 Remove the screws.
2 Disconnect the seat regulator control switch.







6. Disconnect the seat regulator control switch electrical connector and remove the seat regulator control switch.

INSTALLATION

















1. To install, reverse the removal procedure.

NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.