Transmission Insulator and Retainer

Special Tools:

Removal

Note: 4x2 shown, 4x4 similar.

All vehicles
1. Raise the vehicle on a hoist.
Excursion 7.3L diesel





2. Remove the belly pan.
1. Remove the six retaining bolts.
2. Remove the belly pan.
All vehicles





3. Remove the nuts.





4. Install the High Lift Transmission Jack with the E40D Transmission Jack Adapter to the transmission.

5. CAUTION: Be sure not to raise the back of the transmission too high, if it makes contact with the underbody, damage to the TSS and OSS sensors will occur.





Remove the rear transmission mount.
1. Raise the transmission up off the rear crossmember support.
2. Remove the bolts.
3. Remove the rear transmission mount.

Installation
All vehicles

1. CAUTION: Be sure not to raise the back of the transmission too high, if it makes contact with the underbody, damage to the TSS and OSS sensors will occur.





Install the rear transmission mount.
1. Raise the transmission up.
2. Install the rear transmission mount.
3. Install the bolts.





2. Lower the transmission on to the rear crossmember support.





3. Install the nuts.
Excursion 7.3L diesel





4. Install the belly pan.
1. Install the belly pan.
2. Install the six retaining bolts.
All vehicles
5. Remove the supports and lower the vehicle.