Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously
Removal and Replacement
RIVET REMOVAL
1. CAUTION: Do not drill outside the rivet into the frame because that will weaken the frame.
Drill an 1/8-inch pilot hole through the rivet.
2. Redrill an 11/32-inch hole through the shank of the rivet.
3. Remove the rivet head using an air chisel.
4. Drive out the rivet with a punch.
5. Remove the support.
Rivet Replacement
1. Position the support.
2. NOTE: Rivets that are removed will be replaced with new bolts of the same size.
Install new bolts, washers, and nuts that are Property Class 9.8 Metric (Grade 8).