Do you have access to Mitchell1 Prodemand, or eautorepair.net DIY? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

Knock Sensor: Service and Repair

REMOVAL
1. Remove the upper intake manifold. For additional information, refer to Engine.

2. Disconnect the Knock Sensor (KS) electrical connector.

3. Remove the bolt and the KS.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: Make sure the black tapered side is facing up.