Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2000 >> F 450 4WD Super Duty V10-6.8L VIN S >> Repair and Diagnosis >> Specifications >> Mechanical Specifications >> Engine >> System Specifications >> Torque >> Connecting Rod Bolt/Nut
Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay), please get in contact with us ASAP (truly, it is urgent): email operation-charm [[at]] tuta.io or click to submit anonymously

Connecting Rod Bolt/Nut






Note: Be sure to tighten the bolts in two stages.

Tighten the connecting rod bolts in the sequence shown.
^ Stage 1: Tighten to 40-45 Nm (30-33 ft. lbs.).
^ Stage 2: Tighten an additional 90 degrees to 120 degrees.

Rotate the crankshaft and repeat the procedure to position each connecting rod at bottom dead center until all bolts are tightened to specification.

pro multis · About Operation CHARM