Vehicle Damage Warnings

CAUTION:
^ The jack provided with the vehicle is intended to be used in an emergency for changing a deflated tire. To avoid damage to the vehicle, never use the jack to lift the vehicle for any other purpose. Refer to the Owner Guide when using the jack supplied with the vehicle.
^ Under no circumstances should the vehicle ever be lifted by the suspension arm brackets, rear stabilizer or differential housing or convertible cross brace. Severe damage to the vehicle could result.
^ Do not attempt to use jack pressure on either the front bumper or the rear bumper of any vehicle. Damage to the bumper covers will occur.
^ Do not allow the lift adapters to contact the steering linkage, suspension arms, stabilizer arms, or to compress the lower suspension arm stabilizer bar insulator. Damage to the suspension, exhaust and steering linkage components may occur if care is not exercised when positioning the hoist adapters prior to lifting the vehicle.
^ Never use the differential housing as a lift point. Damage to the differential housing and cover may occur.
^ Do not lift vehicle on rocker panel pinch flange or convertible cross brace. Body damage may occur.
^ To prevent possible damage to the underbody, do not drive the vehicle onto the drive on lift without first checking for possible interference.
^ Do not position lift pads under the No.3 crossmember.
^ Do not lift vehicle on rocker panel pinch flange or convertible cross brace. Body damage may occur.
^ Do not carry out the Engine Load Test for more than five seconds or damage to the transmission or transaxle can result.
^ Limit engine running time to one minute or less with belts removed or serious engine damage will result.
^ Never probe moving parts.
^ Do not install brake discs that are less than the minimum thickness specified. Do not machine a brake disc below the minimum thickness specification.
^ Do not use a bench lathe to machine brake discs.
^ Do not twist or strain the powertrain/drivetrain mounts.