Leak Detection Valve: Service and Repair

REMOVAL
1. Remove the EVAP canister. For additional information, refer to Evaporative Emission Control Canister.







2. Remove the canister vent solenoid.

INSTALLATION
1. To install, reverse the removal procedure.
^ Carry out the leak test. For additional information, refer to Evaporative Emission System Leak Test. Evaporative Emission System Leak Test
^ Carry out the evaporative emission repair verification drive cycle. For additional information, refer to Evaporative Emission Repair Verification Drive Cycle. Evaporative Emission Repair Verification Drive Cycle