Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2000 >> Ranger 2WD V6-3.0L VIN V Flex Fuel >> Repair and Diagnosis >> Cruise Control >> Brake Switch (Cruise Control) >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Brake Switch (Cruise Control): Service and Repair

REMOVAL
1. Disconnect the battery ground cable.







2. Disconnect the deactivator switch electrical connector.







3. Remove the deactivator switch.

WARNING: BRAKE FLUID CONTAINS POLYGLYCOL ETHERS AND POLYGLYCOLS. AVOID CONTACT WITH EYES. WASH HAND THOROUGHLY AFTER HANDLING. IF BRAKE FLUID CONTACTS EYES, FLUSH EYES WITH RUNNING WATER FOR 15 MINUTES. GET MEDICAL ATTENTION IF IRRITATION PERSISTS. IF TAKEN INTERNALLY, DRINK WATER AND INDUCE VOMITING. GET MEDICAL ATTENTION IMMEDIATELY.

CAUTION: Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with water.

INSTALLATION







1. To install, reverse the removal procedure.

NOTE:
^ When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.
^ After the deactivator switch is installed, it is necessary to bleed the brake system; refer to Brakes.
pro multis · About Operation CHARM