Lifter / Lash Adjuster, Valve
| Diameter (std) | 0.874 Inch (in) | |
| Clearance Bore | 0.0007 - 0.0027 Inch (in) | |
| Service Limit | 0.005 Inch (in) | |
| Collapsed Tappet Gap (Nominal) | Intake | 0.088 - 0.189 Inch (in) |
| Exhaust | 0.088 - 0.189 Inch (in) | |
| Tappet Bore Diameter | 0.8752 - 0.8767 Inch (in) | |
| Hydraulic Leakdown Rate | see note 20 - 200 seconds to leakdown 3.18 mm (0.125 inch) with 225 newtons (50 pounds) load and tappet filled with leakdown fluid. |