Connecting Rod, Engine
| Connecting Rod Bearings | Clearance To Crankshaft | Desired | 0.001 - 0.0014 |
| Allowable | 0.00086 - 0.0027 | ||
| Bearing Wall Thickness (std) | 0.0572 - 0.0577 | ||
| Main Bearings | Clearance To Crankshaft | Desired | 0.001 - 0.0014 |
| Allowable | 0.0005 - 0.0023 | ||
| Bearing Wall Thickness | 0.0959 - 0.0962 | ||
| Length (center-to-center) | 6.08896 - 6.08211 | ||
| Alignment (Bore-to-bore max. diff.) | Twist | 0.002 per 1 | |
| Bend | 0.0016 per 1 | ||
| Piston Pin Bore Diameter | 0.90315 - 0.90472 | ||
| Crankshaft Bearing Bore Diameter | 2.4266 - 2.4274 | ||
| Out-of-round Limit-Piston Pin Bore | 0.00012 | ||
| Taper Limit Piston Bore | See Note 0.003 per 25 mm0.0001 per inch | ||
| Side Clearance (assembled to crank) | Standard | 0.0047 - 0.01929 | |
| Service Limit | 0.014 | ||
| Connecting Rod Cap Bolts | Refer to Procedure |