Crankshaft Main Bearing
| Jack screws The jack screws are a part of the main bearing cap assembly, and are screwed into the main caps, not the cylinder block. | Stage 1 | 5 Nm (44.6 in.lb) |
| Stage 2 | 9-11 Nm (80-97 in.lb) | |
| Main bearing cap bolts | Stage 1 | 40 Nm (30 ft.lb) |
| Stage 2 | Additional 90 degrees | |
| Cross bolts | Stage 1 | 10 Nm (89.2 in.lb) |
| Stage 2 | 19-23 Nm (14-17 ft.lb) | |
| Crankshaft journal-to-main bearing clearance | 0.066-0.024 mm | |
| Main bearing bore diameter | 72.40-42.424 mm |