Steering Gear
| Gear Ratio | 14 To 1 (: 1) |
| Static steering wheel turning effort | 18 Inch Pound-Force (in.lb) |
| Total meshload over worn bearing preload | 4-9 Inch Pound-Force (in.lb) |
| Turning effort | 6.0 lbs. |
| Turns of steering wheel lock to lock - linkage disconnected | 3.4 Count (ct) |
| Type | Recirculating ball torsion bar |
| Worn bearing preload | 8 Inch Pound-Force (in.lb) |
| Meshload adjuster locknut. | 19.3-25.7 Foot Pound-Force (ft.lb) |
| Steering gear meshload | 12-16 Inch Pound-Force (in.lb) |
| Ball guide clamp bolts | 53 Inch Pound-Force (in.lb) |
| Steering column lower shaft pinch bolt | 35 Foot Pound-Force (ft.lb) |
| Power steering auxiliary actuator | 13 Foot Pound-Force (ft.lb) |
| Power steering gear race nut | 73 Foot Pound-Force (ft.lb) |
| Sector shaft housing bolts | 50 Foot Pound-Force (ft.lb) |
| Steering gear race set screws | 18 Inch Pound-Force (in.lb) |
| Steering gear bolts | 58 Foot Pound-Force (ft.lb) |
| Valve housing bolts | 37 Foot Pound-Force (ft.lb) |
| Sector shaft arm to drag link nut | 56 Foot Pound-Force (ft.lb) |
| Fittings at steering gear | 15 Foot Pound-Force (ft.lb) |