Output State Control (OSC) Procedures

OUTPUT STATE CONTROL (OSC) PROCEDURES

- Carry out visual inspection and vehicle preparation as required.
- Select "Vehicle and Engine Selection" menu.
- Select appropriate vehicle and engine.
- Select "Diagnostic Data Link."
- Select " Powertrain Control Module."
- Select "Output Test Mode."
- Select " KOEO On-Demand Self Test and KOER On-Demand Self "Tests."
- Carry out test and record DTCs.
- Repair all NON-Transmission DTCs.
- Repair all digital TR Sensor DTCs.
- Repair all vehicle speed DTCs.
- Make sure that the vehicle speed sensor and digital TR sensors are functional.
- Select "Active Command Modes."
- Select "Trans - Bench Mode or Trans - Drive Mode."