Air Cleaner Housing: Service and Repair
REMOVAL1. Disconnect the air cleaner.
^ Disconnect the outlet pipe.
^ Disconnect the mass air flow sensor electrical connector.
NOTE: 2.0L Zetec engine shown, 3.0L (4V) engine similar.
2. Remove the bolt and remove the air cleaner housing.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE:
^ Make sure the two air cleaner feet are seated into the rubber grommets under the air cleaner assembly.
^ The air cleaner outlet pipe should be securely sealed to prevent unmetered air from entering the engine.