Liftgate Latch Remote Control

REMOVAL
1. Remove the liftgate trim panel.







2. Disconnect the liftgate lock cylinder actuating rod.
1 Release the clip.
2 Disconnect the actuating rod.







3. Disconnect the liftgate latch remote control actuating rods.
1 Open the clip and disconnect the liftgate window latch actuating rod.
2 Open the clip and disconnect the liftgate latch actuating rod.







4. Disconnect the electrical connectors.
1 If equipped, disconnect the liftgate latch actuator electrical connector.
2 Release the liftgate window latch ajar switch wiring harness locator.







5. Remove the liftgate latch remote control assembly.
1 Remove the screw.
2 Remove the nuts.

INSTALLATION
1. To install, reverse the removal procedure.
^ Transfer all necessary components.