Crankshaft Position Sensor: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.
2. Raise the vehicle; refer to Maintenance/Service and Repair.
3. Remove the exhaust manifold.







4. Disconnect the electrical connector from the Crankshaft Position Sensor (CKP Sensor).







5. Remove the crankshaft position sensor.
^ Remove the bolt.
^ Remove the crankshaft position sensor.

INSTALLATION

1. Lubricate the O-ring lightly with engine oil XO-5W30-QSP or equivalent meeting Ford specification WSS-M2C153-G and the API Certification Mark.

NOTE: Inspect the O-ring for damage; replace if required.







2. Follow the removal procedure in reverse order.