Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2001 >> Excursion 2WD V10-6.8L VIN S >> Repair and Diagnosis >> Powertrain Management >> Computers and Control Systems >> Fuel Tank Pressure Sensor >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la
If it fails: lemon-manuals.org.ua

Or, hide this message: temporarily or permanently

Fuel Tank Pressure Sensor: Service and Repair

REMOVAL
1. Remove the fuel tank.












2. Remove the fuel tank pressure sensor.
^ Disconnect the electrical connector.
^ Press down and rotate the fuel tank pressure sensor counterclockwise and remove it from the fuel tank.

CAUTION: The fuel tank pressure sensor must be disengaged from the fuel tank before it can be removed. Push down while rotating the sensor counterclockwise to disengage it from the fuel tank. Failure to do so can cause damage to the fuel tank pressure sensor or the fuel tank.

INSTALLATION
1. To install, reverse the removal procedure.
^ Carry out the system leak test. Evaporative Emission System Leak Test
^ Carry out the evaporative emission repair verification drive cycle. Evaporative Emission Repair Verification Drive Cycle
pro multis · About Operation CHARM