Rear Seat Cushion

REMOVAL
1. Remove the seat.

NOTE: The 60 percent seat is shown, the 40 percent seat is similar.







2. Remove the nuts.

INSTALLATION







1. Release the tension on the push nuts to allow the cushion studs to move freely.
2. Disassemble the seat cushion.







3. Position the seat cushion to the seat riser, then loosely install the nuts.







4. Align the cushion frame to the sheer pins.

NOTE: Make sure the sheer pins are centered in the holes of the cushion frame.







5. Tighten the nuts.

NOTE: Make sure the seat cushion is closed and positioned as if it were installed.

6. Check the seat cushion latch for correct operation.
7. Assemble the seat cushion.
8. Check the restraint system for correct operation.