Without Side Air Bag

REMOVAL
1. Remove the seat control switch.
2. Remove the seat track.







3. Remove the front seat back pad adjuster.
1 Remove the two screws.
2 Remove the front seat back pad adjuster.







4. Separate the lumbar support adjuster from the adjuster cable.

NOTE: The lumbar support assembly must be fully relaxed.







5. Remove the outboard front seat adjuster from the front seat cushion frame.
1 Remove the bolts.
2 Remove the outboard front seat adjuster.







6. Pull the front seat back frame away from the inboard front seat hinge and feed the lumbar support gear and the seat back heating element electrical lead through the seat cushion opening to remove the front seat back.

NOTE: Do not damage the plastic pivot bushing when removing the seat back frame.

INSTALLATION







1. Connect the outboard front seat hinge to the front seat cushion frame.
1 Position the front seat hinge.
2 Install the bolts.







2. Connect the lumbar support adjuster to the adjuster cable.







3. Install the front seat back pad adjuster.
1 Position the front seat back pad adjuster.
2 Install the two screws.
4. Install the seat track.
5. Install the seat control switch.
6. Check the restraint system for correct operation.