Compressor Cut-Off/Cycling Switch

REMOVAL
1. Disconnect the battery ground cable.







2. Remove the junction block splash shield.







3. Disconnect the cable ends.







4. Remove the junction block bracket.
1 Disengage the connector.
2 Remove the screws.
3 Remove the junction block bracket.







5. Disconnect the A/C cycling pressure switch electrical connector.







6. Remove the A/C cycling switch from the top of the suction accumulator.

INSTALLATION












1. To install, reverse the removal procedure.
^ Lubricate the O-ring seal with PAG Refrigerant Compressor Oil (R- 134a Systems) F7AZ-19589-DA (Motorcraft YN-12-C), or equivalent, meeting Ford specification WSH-M1C231-B.
2. Carry out the refrigerant system Leak Detection.