Connecting Rod
| Connecting Rod | Piston Pin Bore Diameter | 21.959-21.979 mm |
| Crankshaft Bearing Bore Diameter | 56.756-56.876 mm | |
| Length (Center-to-Center) | 150.7 mm | |
| Alignment (Bore-to-Bore Max. Diff.) - Twist | 0.050 mm per 25 mm The pin bore and crank bearing bore must be parallel and in the same vertical plane within the specified total difference when measured at the ends of a 203 mm bar, 101.5 mm on each side of rod centerline. | |
| Alignment (Bore-to-Bore Max. Diff.) - Bend | 0.038 mm per 25 mm | |
| Side Clearance (assembled to crank) - Standard | 0.015-0.45 mm | |
| Side Clearance (assembled to crank) - Service Limit | 0.05 mm MAX |