Frame, Rear Quarter, Vented

REMOVAL
1. Remove the vented rear quarter window glass.







2. Remove the quarter window glass frame.
1 Remove the 10 nuts.
2 Remove the quarter window glass frame.
3. Clean the excess foam butyl from the window opening.

INSTALLATION
1. Apply 8 mm Foam Butyl or equivalent meeting Ford specification WSB-M2G234-C to the rear quarter window glass frame.
^ Start at the bottom middle and work around the frame.

NOTE: When applying foam butyl, leave a slight overlap at the bottom to allow for drainage.







2. Install the rear quarter window glass frame.
1 Position the rear quarter window glass frame.
2 Install the 10 nuts.

NOTE: loosely install all the nuts before tightening.

3. Install the rear quarter window glass.