With Electronic Automatic Temperature Control

REMOVAL
1. Disconnect the battery ground cable.







2. Detach the center instrument panel finish panel.
1 Rotate the center instrument panel finish panel vents inward.
2 Through the vent openings, grasp the center instrument panel finish panel and pull outward.
3 Detach the center instrument panel finish panel.







3. Remove the screws from the electronic automatic temperature control (EATC) module.







4. Remove the EATC module.
1 Disconnect the electrical connectors.
2 Remove the nuts.
3 Disconnect the vacuum harness connector and remove the EATC module.

INSTALLATION
1. To install, reverse the removal procedure.