Four Door

Special Service Tool(s):

SPECIAL SERVICE TOOL(S)

REMOVAL







1. If equipped, remove the retractable cargo cover.







2. Remove the liftgate scuff plate.
1 Starting at either end and working along the liftgate scuff plate, use Windshield and Molding/Trim Removal Kit to remove the scuff plate.
2 Remove the liftgate scuff plate.







3. If equipped, remove the rear power lock switch assembly.
- Disconnect the electrical connector.
4. Remove the B-pillar trim panel.







5. Remove the three rear quarter trim panel screws.
- Position the carpet aside to gain access to the screws.







6. Remove the rear safety belt anchor nut.







7. Open the rear safety belt guide bolt cover.







8. Using the special tool, remove the rear safety belt guide bolt.







9. Remove the quarter trim panel.
1 Remove the pin-type retainers.
2 Feed the safety belt webbing through the opening in the quarter trim panel.
3 Remove the quarter trim panel.

INSTALLATION







1. Install the quarter trim panel.
1 Feed the safety belt webbing through the opening in the quarter trim panel.
2 Position the quarter trim panel.
3 Install the pin-type retainers.







2. Using the special tool, install the rear safety belt guide bolt.







3. Close the rear safety belt guide bolt cover.







4. Install the rear safety belt anchor nut.







5. Install the three rear quarter trim panel screws.
6. Install the B-pillar trim panel.







7. Install the liftgate scuff plate.
1 Position the liftgate scuff plate.
2 Start at either end and work along the liftgate scuff plate, pushing it into the floor panel.







8. If equipped, install the retractable cargo cover.