Coolant Reservoir: Service and Repair
Removal1. Remove the air cleaner outlet tube and the engine air cleaner (ACL).
2. Remove the bolt and position the speed control servo aside.
3. Disconnect the windshield washer hose from under the dash panel and plug the end of the hose.
4. Disconnect the windshield washer pump electrical connector from the windshield washer reservoir.
5. Position the (A) clamp back and disconnect the (B) radiator overflow hose from the (C) radiator filler neck and plug the hose.
6. Remove the (A) two nuts and the (B) bolts.
7. Remove the radiator coolant recovery reservoir and the windshield washer reservoir.
Installation
1. Install the radiator coolant recovery reservoir and the windshield washer reservoir.
2. Install the bolts and the two nuts.
3. Connect the (B) radiator overflow hose to the (C) radiator filler neck and position the (A) clamp.
4. Connect the windshield washer pump electrical connector to the windshield washer reservoir.
5. Connect the windshield washer hose under the dash panel.
6. Position the speed control servo and bracket and install the bolt.
7. Fill the cooling system.