Instrument Panel Circuit Board: Service and Repair

REMOVAL

WARNING: ILLUMINATION BULBS ARE PRESSURIZED AND MAY SHATTER IF IMPROPERLY HANDLED. WEAR EYE PROTECTION WHEN REPLACING ILLUMINATION BULBS.

CAUTION: If gauges are being removed from the cluster assembly, do not remove the gauge pointers. Magnetic gauges cannot be recalibrated.

1. Remove the instrument cluster; refer to Instrument Panel.
2. Remove the illumination and indicator bulbs; refer to Warning Indicator Bulb.
3. Remove the gauges; refer to Gauges.







4. Remove the nineteen instrument gauge clips.


NOTE: Do not reuse instrument gauge clips.







5. Remove the instrument cluster printed circuit.

INSTALLATION
1. To install, reverse the removal procedure.