Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously. (I know, we said we wouldn't ask any more...but it's important!)
Initial Inspection and Diagnostic Overview
INSPECTION AND VERIFICATIONLeaks
NOTE: Trim will reveal the location of most leaks.
1. Remove any trim or carpet in the general area of the leak.
2. Road test or water test the vehicle.
3. Inspect for a dust pattern around the area in question.
4. Inspect for water paths near and above the area in question.
5. Some leaks can be located by placing bright light under the vehicle, removing any necessary trim or carpet, and inspecting the interior of the body at joints and weld lines.
Noise
Wind noise, rattles, and their sources are detected by driving the vehicle at highway speeds. The vehicle should be driven in four different directions, with all the windows closed, the radio off, the blower motor off, and all the ventilation ducts open.
Most wind noise leaks will occur at the door and window seals or at the sheet metal joints in the door or the door opening