C-Pillar Trim Panel

C-PILLAR TRIM PANEL

Special Tool(s)

Removal and Installation
1. Remove the B-pillar trim panel.

2. Open the rear safety belt guide bolt cover.

3. Using the special tool, remove the rear safety belt guide bolt.
4. Position the carpet aside.

5. Remove the rear safety belt anchor nut.

6. Remove the roof trim panel.

7. Remove the six luggage compartment back lower trim cover screws.

8. Remove the luggage compartment back lower trim cover.
- Remove the six pin-type retainers.

9. Remove the pin-type retainer from C-pillar trim panel.
10. Remove the safety belt anchor trim cover.

11. Remove the C-pillar trim panel.
- Feed the safety belt webbing through the opening.

12. To install, reverse the removal procedure.