Brake Disc

Disc

Removal and Installation

1. NOTE: When removing the rear brake disc in this procedure it is not necessary to disconnect the hydraulic lines.

Remove the rear disc brake caliper.





2. NOTE: If the rear brake disc binds on the rear parking brake shoe and linings, remove the adjustment hole access plug and retract the parking brake shoe and lining.

Remove the rear brake disc.





3. CAUTION: Use a hub-mount brake lathe if necessary to machine the rear brake disc.

Measure the rear brake disc, and resurface as necessary. Install a new rear brake disc if beyond specification.
4. To install, reverse the removal procedure.