Connecting Rod Bolt/Nut
NOTE: Main bearing caps are removed for clarity.
Tighten the bolts in two stages, using the sequence shown.
^ Stage 1: Tighten to 40 - 45 Nm (30 - 33 ft. lbs.).
^ Stage 2: Tighten an additional 90-120 degrees.
NOTE: Main bearing caps are removed for clarity.
Tighten the bolts in two stages, using the sequence shown.
^ Stage 1: Tighten to 40 - 45 Nm (30 - 33 ft. lbs.).
^ Stage 2: Tighten an additional 90-120 degrees.