Operation CHARM: Car repair manuals for everyone.
Home >> Ford >> 2001 >> Mustang V6-3.8L VIN 4 >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Transmission Position Sensor/Switch >> Service and Repair
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Transmission Position Sensor/Switch: Service and Repair

Digital Transmission Range (TR) Sensor

Special Tools:





Special Tool(s)

1. Disconnect the battery ground cable.
2. Raise and support the vehicle.





3. Disconnect the connector.





4. Disconnect the manual lever shift control cable.





5. Loosen the digital TR bolts.





6. NOTE: The tool is designed to fit snugly.

NOTE: Manual shift lever shaft must be in the neutral position.

Using the special tool, align the digital TR sensor slots.





7. Tighten the bolts.





8. With the manual lever in overdrive connect the shift lever control cable.





9. Install the digital TR sensor electrical connector.
10. Lower the vehicle.

11. NOTE: When the battery is disconnected and reconnected, some abnormal driving symptoms may occur while the vehicle relearns its adaptive strategy.

The vehicle may need to be driven 16 km (10 miles) or more to relearn the strategy.

pro multis · About Operation CHARM