Vehicle Speed Sensor: Service and Repair

Output Shaft Speed (OSS) Sensor

Removal
1. Raise and support the vehicle.





2. Disconnect output shaft speed (OSS) sensor electrical connector.





3. Remove OSS sensor.
1. Remove the OSS sensor screw.
2. Remove the OSS sensor from the transmission.
^ Inspect the OSS sensor O-ring for damage. If damaged, install a new O-ring.

Installation





1. Inspect and lubricate O-ring with petroleum jelly.
1. Install the OSS sensor into the transmission.
2. Tighten OSS sensor screw.





2. Connect OSS sensor electrical connector.
3. Lower the vehicle.