Control Assembly: Service and Repair
REMOVAL1. Rotate the temperature control knob to the full COOL position.
2. Remove the audio unit.
3. Remove the center instrument panel finish panel.
1 Remove the screws.
2 Disengage the spring clips and remove the center instrument panel finish panel.
4. Disconnect the electrical connectors.
5. Remove the screws and remove the climate control assembly.
6. Disconnect the electrical connectors and vacuum connector.
7. Pull and remove the temperature control knob.
8. Detach the temperature control switch from the climate control head with the temperature blend door control cable still attached.
^ Remove the screw.
^ Rotate the temperature control switch and detach from the control head.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: If installing a new climate control assembly, the function selector switch and the blower motor switch must be transferred from the old unit.