Description

The warning device system consists of the following components:
^ generic Electronic Module (GEM)
^ safety Belt Warning Indicator switch, which is an integral part of the driver safety belt retractor pretensioner
^ key-in-ignition warning switch
^ door ajar switch(es)

There are five warning chimes and lamps the GEM controls: headlamps operating without the ignition on (chime only). door ajar (chime and lamp), key-in-ignition (chime only), driver safety belt warning (chime and tamp), and belt minder (chime and lamp).

NOTE: The GEM is diagnosed through the Data Link Connector (DLC) with a diagnostic tool.

For removal and installation information of the GEM, refer to Multifunction Electronic Control Module (General Module). For removal and installation information of the door ajar switch(es), refer to Locks.