Cylinder Head Assembly

Combustion Chamber Volume		2.874 cu in
Valve Seat Bore Diameter (Insert counterbore diameter)	Intake - Maximum	1.8542 in
	Intake - Minimum	1.8532 in
	Exhaust - Maximum	1.5645 in
Gasket Surface Flatness		0.003 in over 6 in
Cylinder Head Bolts	Stage 1	50 Nm (37 ft.lb)
	Stage 2	Loosen one full turn
	Stage 3	30 Nm (22 ft.lb)
	Stage 4	Rotate additional 90 degrees
	Stage 5	Rotate additonal 90 degrees
	LH Sequence	---
	RH Sequence	---
Intake Manifold - Upper	Stage 1	Hand tight
	Stage 2	10 Nm (89 in.lb)
Intake Manifold - Lower	Stage 1	15 Nm (11 ft.lb)
	Stage 2	32 Nm (24 ft.lb)
Exhaust Manifold - LH	Stage 1	10 Nm (8 ft.lb)
	Stage 2	22 Nm (16 ft.lb)
Exhaust Manifold - RH	Stage 1	10 Nm (89 in.lb)
	Stage 2	22 Nm (16 ft.lb)
Camshaft Sprocket Bolt		63 Nm (46 ft.lb)
RH Catalytic Converter Heat Shield to Cylinder Head Bolt		15 ft.lb