Cruise Control Servo: Service and Repair

REMOVAL
1. Disconnect the battery ground cable.
2. Remove the engine air cleaner.
3. Remove the air cleaner outlet tube.







4. Remove the accelerator control splash shield.







5. Disconnect the speed control cable.
1 Disconnect the speed control cable from the throttle body cam.
2 Squeeze the retaining tabs and remove the speed control cable.







6. Position the radiator coolant recovery reservoir aside.
1 Remove the bolts.
2 Position the reservoir aside.







7. Detach the speed control servo from the inner fender well.
1 Disconnect the speed control servo electrical connector.
2 Remove the bolts to detach the servo.







8. Remove the speed control servo.
1 Press the locking tab in.
2 Rotate the speed control cable cap and disconnect the speed control cable.
3 Remove the speed control servo.







9. Detach the speed control servo from the bracket.
1 Remove the bolts.
2 Detach the speed control servo from the bracket.

INSTALLATION
1. To install, reverse the removal procedure.