Torque
| Connecting Rod Bearing Cap Torque Install new bolts and tighten in two stages. | Stage 1 | 26 ft. lbs. |
| Stage 2 | Tighten the bolts an additional 90 degrees. | |
| Crankshaft rear oil seal housing bolts | Stage 1 | 9 ft. lbs. |
| Stage 2 | 45° | |
| Crankshaft pulley bolt | 85 ft. lbs. | |
| Mail Bearing Cap Torque | Stage 1 | 18 ft. lbs. |
| Stage 2 | Tighten the bolts an additional 60 degrees. |