Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Powertrain Control Module - Automatic Transaxle

REMOVAL

CAUTION: Electronic modules are sensitive to static electrical charges. If the modules are exposed to these charges, damage may result. Refer to Module Communications Network (Information Bus) for module service precautions.

1. Disconnect the battery ground cable.
2. Remove the parking brake and shift consoles.







3. Place the gearshift lever in LOW and remove the transmission control selector dial bezel screws.







4. Turn the transmission control selector dial bezel one-quarter turn counterclockwise.







5. Loosen the bolt and disconnect the Powertrain Control Module (PCM) electrical connector.







6. Slide the PCM straight out.

NOTE: Make sure the anti-rattle clips are correctly aligned when installing.

INSTALLATION
1. To install, reverse the removal procedure.