Operation CHARM: Car repair manuals for everyone.
Manuals through 2025 now available!

Our trusted friends have launched a new website named LEMON, which has newer manuals. It also contains all the CHARM manuals.

LEMON is the spiritual successor to CHARM, I recommend you try it!

Link: lemon-manuals.la or lemon-manuals.org.ua

(Some people have issue connecting. LEMON is investigating. For now, use Firefox or change your DNS server)

Or, hide this message: temporarily or permanently

Leak Detection Valve: Service and Repair

REMOVAL







1. Disconnect the canister vent solenoid electrical connector.







2. Remove the canister vent solenoid from the Evaporative Emission (EVAP) canister.

NOTE: A twisting and pulling motion is necessary to remove the canister vent solenoid.

INSTALLATION
1. To install, reverse the removal procedure.
^ Carry out the evaporative emissions canister leak test. Evaporative Emission System Leak Test
^ Carry out the evaporative emission repair verification drive cycle. Evaporative Emission Repair Verification Drive Cycle

NOTE:
^ Inspect and install new O-ring seals as necessary.
^ Lubricate all O-ring seals with MERPOL(R) O-ring Seal Lubricant or equivalent meeting Ford specification ESE-M99B144-B.