Connecting Rod

Rod Bearing I.D.		2.5005-2.5025 in Connecting rod bearing bore maximum out-of-round-0.0005 and maximum bore taper-0.0005. With bearing caps tightened in place.
Rod Length Center to Center		7.130 in
Connecting Rod Alignment Maximum Total Difference	Twist	0.002 in
	Bend	0.001in
Rod to Crankshaft Assembled Side Clearance		0.012-0.024 in
Piston Pin Bushing I.D.		1.308-1.309 in
Crankpin Bearing Bore Diameter		2.6905-2.6915 in
Bearing Bore	Out-of-Round (Max)	0.0005 in
	Taper per inch (Max)	0.0005 in