Cable

REMOVAL







1. Remove the screws and the engine appearance cover.







2. Remove the accelerator return spring.







3. Disconnect the accelerator cable and speed control cable from the throttle body.







4. Remove the accelerator cable from the bracket.







5. Remove the accelerator cable from the rubber plunger.







6. Remove the rubber plunger from the accelerator pedal.







7. Remove the accelerator cable from the accelerator pedal.







8. Pull the accelerator cable boot to the unlock position.







9. Remove the accelerator cable boot and cable from the dash panel into the engine compartment and remove the accelerator cable.

INSTALLATION
1. To install, reverse the removal procedure.