Speaker Walk-Around Test

NOTE: To enter the speaker walk-around test or ACM self-diagnostic mode, the ACM must be turned on and in radio tuner mode (AM/FM).

The ACM self-diagnostic mode tests can only be entered while in the Speaker Walk-Around Test.

1. To enter the Speaker Walk-Around Test, press Preset Buttons 3 and 6 simultaneously, hold for approximately three seconds and then release.
2. The Speaker Walk-Around Test stops at each speaker and applies tone to each speaker for approximately 1-2 seconds. Each speaker is tested and shown on the display in the following sequence: RF, LF, LR, RR, SUBWOOFER I, and SUBWOOFER II.
3. The speaker walk-around test automatically continues and tests Subwoofer I and Subwoofer II for speaker short and CD/DJ. If a speaker short exists, SPKR SHORT will be displayed. If the vehicle is not equipped with CD/DJ or if the CD/DJ is not responding, NO CDDJ or NO DJ will be displayed.