Vehicle Damage Warnings

CAUTION:
- Do not handle the passenger air bag module by grabbing the edges of the deployment door.
- Do not deactivate the side air bag module circuit be removing the side air bag bridge resistor from the side air bag to floor connector.
- When positioning the seat or separating the seat bottom from the back, be careful not to damage the seat back pivot and any of the wires or cables from the seat back to the seat bottom. This can cause damage to one of the seat components.
- When positioning the seat or installing the bottom to the seat back, be careful not to damage the seat back pivot and any of the wires or cables from the seat back to the seat bottom. This can cause damage to one of the seat components.
- Use care when disconnecting the seat cushion side shield from the seat cushion frame so the tabs on the seat cushion side shield are not damaged.
- Use care when handling the seat and track assembly. Dropping the assembly or sitting on a seat not secured in the vehicle may result in damaged components.
- Use care when separating the seat cushion trim cover from the hook and loop strip. The hook and loop strip can be torn from the seat cushion foam.
- Make sure the side air bag wiring harness is not pinched between the side air bag module and the mounting bracket.
- The retaining nuts of the side air bag module must be tightened in the sequence described.