Intermediate Shaft Speed Sensor

Intermediate Shaft Speed Sensor

Removal
1. Raise and support the vehicle.





2. Disconnect Intermediate Shaft Speed (ISS) sensor electrical connector.





3. Remove ISS sensor.
1 Remove the ISS sensor screw.
2 Remove the ISS sensor from the transmission.
- Inspect the ISS sensor O-ring for damage. If damaged, install a new O-ring.

Installation





1. Inspect and lubricate O-ring with petroleum jelly.
1 Install the ISS sensor into the transmission.
2 Tighten ISS sensor screw.





2. Connect ISS sensor electrical connector.
3. Lower the vehicle.