Door Lock Cylinder: Service and Repair

REMOVAL

NOTE: Individual lock cylinders are repaired by discarding the inoperative cylinder and building a new lock cylinder using the appropriate lock repair package. The lock repair package includes a detailed instruction sheet to build the new lock cylinder to the current key code of the vehicle.

1. Remove the drivers door exterior handle.







2. Remove the door lock cylinder.
1 Remove the spring clip.
2 Remove the door lock cylinder.

INSTALLATION
1. To install, reverse the removal procedure.

NOTE: Make sure the lock release rod is not preloading the latch. It should be clipped in a relaxed state with no slack.