Control Module HVAC: Service and Repair

REMOVAL







1. Disengage the stops and lower the glove compartment door.







2. Remove the right front scuff plate.







3. Position aside the weatherstrip.







4. Remove the RH front kickpad.







5. Remove the RH lower instrument panel insulator.







6. Disengage the aspirator hose from the bracket.

NOTE: Part shown out of vehicle position.







7. Disengage the blower motor speed control mounting bracket from the instrument panel.







8. Disconnect the connectors.







9. Disengage the retaining tabs and remove the blower motor speed control from the mounting bracket.

INSTALLATION
1. To install, reverse the removal procedure.