Do you have access to Mitchell1 Prodemand? If you are willing to share user/password (we can pay $250), please get in contact with us ASAP: email operation-charm [[at]] tuta.io or click to submit anonymously
Test K: LFC 35/DTC B1935 - Passenger Air Bag Circuit Resistance Lo
K1:
K2:
K3 - K4:
K5:
Normal Operation
The Restraints Control Module (RCM) monitors the resistance of the passenger air bag ignitor by measuring the resistance between pins 6 and 7. If the RCM detects low resistance between these pins, it will store a Diagnostic Trouble Code (DTC) B1935 in memory and flash a Lamp Fault Code (LFC) 35 (or higher priority code if one exists) on the air bag indicator.
Possible Causes
Passenger air bag low resistance can be caused by:
^ a short in the Wiring harness.
^ a low resistance in the passenger air bag module.
^ an RCM internal concern.
^ a worn or damaged connector shorting bar or camming beam.